4 Steps for Fixing a Leaky Roof
Fixing a Leaky Roof
Storms can wreak havoc on your commercial property in Lakesite, TN, but for most problems, there is a pretty straightforward solution. If the most recent thunderstorm pummeled your building with hail, high winds or heavy rains, it is likely that you will have a roof leak. Here are the four steps remediation experts can take to fix it.
1. Assess the Situation
Every damaged roof is different. Your roof may show no outward signs of a problem but definite signs of leaking through the ceiling. You may see lots of debris on the outside while everything inside looks intact. Professionals know the signs to look for both inside and outside so that they can address every issue that exists.
2. Remove Wet Materials
A roof leak will inevitably get something wet that shouldn't be exposed to excess moisture. For example, if your ceiling insulation is saturated, it will likely need to be torn out and replaced. Not only is storm weather contaminated, the dampness also tends to penetrate the porous material and weaken it.
3. Dry and Disinfect
After all the unsalvageable material is gone, everything that remains must be thoroughly dried. Failure to do this could lead to secondary damage, such as mold growth. Surfaces should be dry, and dehumidifiers should be used to control the moisture in the air. After drying, technicians will disinfect every part of the structure and every item that is going to remain within it.
4. Rebuild the Structure
The last step is reconstruction. Walls, insulation and ceilings that were removed must be rebuilt. Holes in the roof are patched and missing shingles are replaced. The restoration job is not finished until your building looks as good or better than it did before the storm.
A roof leak may cause a lot of damage, but that doesn't mean it can't be fixed. When you hire trusted professionals to restore your property, you can rest assured that the problem will be resolved.